Third-party premium has changed from 1st June. Renew now
What is ABS in a Car: Features, Benefits & How It Works
Have you ever wondered how your vehicle maintains the steering control while braking? The reason behind this mechanism is ABS or the Anti-Lock Braking System.
Since sudden brakes can cause wheels to not spin, eventually leading to loss of traction, it can later result in severe damage to the car and cause accidents.
This is why manufacturers include ABS in a car to prevent the wheels from locking and improve steering and traction control.
Continue reading to discover more about the ABS and its types and functions.
What Is ABS in a Car?
The Anti-Lock Braking System was first introduced during the 1920s. However, not until 1970 did the use of ABS in cars become popular, and this system got incorporated within commercial vehicles. In recent times almost every vehicle is equipped with an ABS to save from sudden brakes and tyre skidding.
Anti-Lock Braking System consists of the following parts:
- Speed Sensors: The function of these speed sensors is to observe how fast these wheels rotate.
- Pump: Hydraulic fluid is present in these pumps that aid in applying pressure to the brake callipers.
- Valves: These are responsible for allowing, blocking or releasing pressure on the brakes.
- Controller: ECU, or electronic control unit, is the brain of ABS. It uses data from its sensors to comprehend whether to apply the brakes.
Drivers have reported that the effectiveness of this mechanism is highly beneficial. As research shows, nonfatal car crashes have reduced to 6% in cars after incorporating the ABS.
What Are the Different Types of ABS in Cars?
There are three different kinds of Anti-Lock Braking systems in a car. Namely, four channel, three channel and one channel. These channels are also termed sensors. Here is a brief description of them and their functions.
1. Four Channel/ Four Sensor
The function of this system is to designate different valves for each wheel. In addition, it also separates speed sensors for the four wheels. This is the most preferred type of ABS because it monitors every individual wheel to check whether the braking force is optimally achieved.
2. Three Channel/ Three Sensor
This kind of ABS mainly focuses on the front wheels by providing each with a valve and speed sensor. Another sensor is located at the rear axle that impacts both rear brakes. Nevertheless, since one sensor and valve are shared among the rear wheels, they are always monitored together. So, if one-wheel locks, these brakes will not have the same effectiveness.
3. One Channel/ One Sensor
Here only one valve and speed sensor are positioned to monitor four wheels. This is also located in the rear axle. However, it also has the same issue as the three-channel ABS, the risk of locking up one rear wheel.
How Does ABS Work?
These are some of the steps to understand the function of ABS in cars:
- The wheel sensors present in a car are used to monitor the speed of the wheels individually. ECU, or electronic control unit, focuses on its readings. If any abnormality is noticed in any of the wheels, like speed reducing significantly, ECU signals valves. Then these valves reduce the brake pressure and get closed.
- When wheels start acceleration again, ECU signals those valves to open and increase their pressure. This is how brakes are applied.
- This process keeps on repeating until this brake application becomes normal.
What Are the Pros and Cons of ABS in Cars?
The table below highlights some prominent benefits and drawbacks of the Anti-Lock Braking System.
| Advantages of ABS in a Car | Disadvantages of ABS in a Car |
|---|---|
| Stops a car from skidding even in wet and slippery conditions. | Some have reported due to ABS, stopping at certain distances is lengthened, caused as a result of any technical error. |
| ABS in a car increases its resale value. | The Anti-Lock Braking system is expensive to maintain. |
| ABS is a thoroughly tested safety device. Hence, those buying cars with ABS can get better discounts on insurance. | It is a delicate system. If not carefully used, it can lead to problems like disorientation, shuddering of the vehicle or worsening the brakes. |
| The Anti-Lock Braking system has an interconnected infrastructure with a traction control system. This ensures each wheel has traction on the road. | Corrosion can contaminate brake fluid and affect the hydraulic control unit. |
By applying ABS, a vehicle can stop at a shorter distance, hence providing better control to drivers in dangerous situations. Other benefits of ABS in a car include preventing uneven tyre wear as ABS diminishes the condition of wheels locking up.
Although the ABS in a car seems a complicated process to comprehend, it is otherwise. Previously this anti-skid or Anti-Lock Braking System was only used in cars and trucks. During those times, Anti-Lock Braking systems were non-electrical models, mechanically controlled to adjust the brake application. Nowadays, these systems are computerised electro-hydromechanical brake hydraulic systems.
According to experts, the correct way of using Anti-Lock Brakes is never to pump the pedal during an abrupt stop. Rather, they suggest applying a steady pedal and allowing this system to function accordingly. If this process is followed, there would be lesser damage to the ABS.
Frequently Asked Questions
If the ABS lights are on, what should one do?
When the ABS lights are flashing on your dashboard, it indicates an issue with its mechanism. Therefore, the vehicle loses support from the ABS and will not have assistance during hard brakes. This is when one must check brake fluids or drive to any nearest garage for support.
Is it possible to repair an ABS system?
Repairing an Anti-Lock Braking system is much more economical than replacing the whole system. Yet, if someone wants, they can replace the whole thing and install a new system by a professional.