Everything You Need to Know About Bike Maintenance

Source: monimoto.com

A bike is like a child to many riders. Though, it is a common tendency to not take care of or maintain one’s bike after a few months or years of buying. However, bike maintenance is crucial to increase mileage, longevity and performance of all bike components.

Continue reading this article to get the bike maintenance checklist!

Here are ten tips on bike maintenance that will help your bike look and feel brand new for a longer time –

1. Check the Tyres Regularly

It is essential to keep a check on your bike tyres. This includes checking a bike’s tyre condition and its air pressure. Ensure that tyre pressure is maintained at levels specified by the bike manufacturer.

Make sure to check for possible craps and cuts in the tyre to avoid unplanned discrepancies like blowouts. Check tyre treads at least once every week and check the wheel alignment and balance.

2. Check the Engine Oil Level

One of the most important tips for bike maintenance is checking the engine oil level. Engine oil lubricates its components and ensures a smooth and hassle-free ride.

Check your bike's engine oil level regularly and make sure to maintain the optimum engine oil level. Check if there is oil leakage and any brown deposits in the oil. This will not only increase fuel consumption but also reduce your bike’s longevity.

3. Adjust the Clutch

A clutch is the part of a bike applicable while changing gears. Adjust the clutch correctly and ensure it has enough free play. Make sure that you do not tighten it too much, as it can lead to higher fuel consumption.

4. Clean the Air Filter

The air filter in a bike clogs up very quickly due to dust accumulation over a long period. Therefore, cleaning the air filter in regular intervals becomes imperative. Moreover, the frequency of cleaning should be increased specifically in dusty conditions.

5. Ensure the Engine’s Maintenance Regularly

Engine is said to be the heart of your motorbike. Take your bike for regular servicing and tuning to ensure longevity of engine and reduce fuel bills. Make sure to keep the carburettor and valve clearances clean. Also, check if the engine spark plug is properly clean and set the gap properly. This spark plug plays an integral part in engine combustion.

6. Check the Transmission System

A bike’s chain needs regular lubrication, adjustment and cleaning for its smooth functioning. Wash the chain using paraffin and then take a soft brush or piece of cloth to remove dirt particles from this chain. However, never use water to wash a bike's chain as it can rust the chain links. After washing, use a clean and dry cloth to wipe the chain.

7. Clean the Surface

Any two-wheeler surface needs cleaning at regular intervals to keep the surface finish intact. However, before cleaning, make sure to thoroughly cover the H.T. coil, ignition switch and silencer with plastic sheets. Avoid parking your bike underneath direct sunlight as it can affect its appearance. Use a microfiber cloth while cleaning your bike.

8. Increase the Battery Life

A bike's battery needs periodic maintenance to sustain hassle-free and long life. Top up the bike's battery with distilled water, if needed. Check if there is any leakage from the battery.

9. Check the Brakes Regularly

Make sure to keep the brakes that hold the tyres adequately spaced. It is very dangerous if the brakes are too tight or loose. These brakes should be tightened as per the requirement and style of a rider. Change brake pads if you hear a screeching sound.

10. Maintain the Riding Speed Limit

Try to maintain a speed of 40 km/h to 60 km/h in order to lower fuel consumption and to maintain good health of the bike.

These are some tips for bike maintenance that every bike owner should follow. The next section will put some light on bike maintenance tips for beginners

Bike maintenance guidelines for beginners are – 

• If tyres are cold, make sure to fill them with air. This will ensure better mileage and engine performance.
• Do not go above 55 km/h for the first 1000 km. This ensures proper traction and longevity of the tyres.
• Make sure to clean the chain and put lubricant on it. It increases the life of the chain and sprockets.
• Tyre rims should be checked to see if there are any dents or cracks. This will help you stay protected from on-road fatalities.
• Gain knowledge on which engine oil is good and change it at regular intervals to ensure a smooth riding experience. This also increases the life of the engine components.

Additionally, being careful about certain things is necessary to maintain your vehicle’s health. Do not park your two-wheeler in areas prone to dust, water, or underneath direct sunlight, as this may turn your bike surface dull. Following these bike maintenance tips will surely help keep your two-wheeler in good condition and extend its longevity.